TROLLEYS & CLAMPS
Trolleys

CBT Trolley

Plain or Geared Trolleys - Versatile, Economical, and Reliable

The smooth rolling CM Hoist CBT is the economical choice for most applications. The trolley features steel wrap around side plates, dual tread wheels and lifetime lubricated shielded ball bearings. The CBT Model by CM Hoist is available in plain and geared models.

Capacities - Rated loads from 1/4 to 5 Ton (Metric Rated). In plain and geared models.

Economical - Excellent low cost choice for manual and powered hoists.

Rugged - Designed to provide superior performance and long, efficient service.

Low Rolling Effort - Geared models have standard 6-foot hand chain drop. Other hand chain drops available.

Adjustable - Trolley easily adjusts to fit any beam flange within range of adjustment, up to an 8.7" flange width.

Wrap-Around Side Plates - Lugs provide additional security to increase operator safety and act as bumpers to protect wheels.

Dual Tread Wheels - Will fit either tapered or flat beam flange within range of adjustment. Wheels include permanently lubricated, shielded ball bearings for long life and low maintenance.

Lifetime Warranty

CBT Trolley Specifications

Series 84A Trolley

The CM Series 84A Trolley features a minimal maintenance design with fully sealed precision bearings, heavy-duty side frames and fully machined wheel tread for a superior performance over a long life.

Capacities from 1/2 to 8 tons

Lifetime lubricated, precision ball bearings on trolleys through 3 ton capacity. Trolleys with capacities over 4 tons are equipped with eight sealed, Timken tapered roller bearings and grease fittings.

Side frames extend beyond the wheels to provide trolleys with superior strength, rigidity and added protection for the track wheels. Units with capacities from 1/2 – 12 tons employ universal wheel treads for use on flat or tapered beam flanges.

ASME B30.1

Series 84A Trolley Specifications

Series 635 Low Headroom Trolley

The CM Series 635 Low Headroom Trolley was designed to be utilized with the CM Lodestar where versatility and strength are key components.

Rigid lug mount

Precision ball bearings

Suits standard or flat flange beams

ASME B30.11

Series 635 Low Headroom Trolley Specifications

Series 632 Close Radius Trolley

The CM Series 632 Close Radius Trolley features a shorter and lighter design than competitive trolleys - with all the strength. It has the ability to handle tight curves and maintain low headroom capabilities.

Capacities from 1/4 to 3 tons

Exclusive Dial-Fit collar quickly adapts trolley to wide range of beams and patented rails

Negotiates radius curves as tight as 7 to 10 inches

Made of highest quality rolled steel

ASME B30.21

Series 632 Close Radius Trolley Specifications
Clamps

CZ Universal Plate Clamp

CM CZ Universal Plate Clamps enable plates to be turned over or lifted from the horizontal to the true vertical position.

Body of clamp is welded construction

Fitted with hook ring that can be replaced with a short length of chain and master link

Clamp jaws and pads are manufactured from high tensile steel for positive grip and locking mechanism

Suitable for all structural steel up to 300 Brinell surface hardness
Note: CZ920 500 supplied without lock.
ASME B30.20

CZ Universal Plate Clamp Specifications

CH Heavy Duty Horizontal Plate Clamp

Used in pairs, this range of clamps is ideal for loading machines and moving plate material in the horizontal position.

The two jaws and wide toe plate give the clamp a stable grip on the plate

The integral shackle ring will accept chain sling hooks or wire rope slings directly

ASME B30.20

Sold in pairs

CH Heavy Duty Horizontal Plate Clamp Specifications

BC Beam Clamp

The BC Beam Clamp is designed to fit a wide range of flanges. Special clamp jaw design distributes load away from the flange edge.

Capacities from 1 to 10 Tons

BC Beam Clamp Specifications